It appears that your cart is currently empty
Hard Arkansas Stone 6x2 400-650 Grit Arkansas Novaculite by LANSKY
The LANSKY Hard Arkansas Stone 6x2" is a premium natural sharpening stone designed for putting a refined, polished edge on knives and edged tools. Crafted from genuine Arkansas Novaculite, this bench stone is intended for the final stages of sharpening, helping to remove fine burrs and leave a smooth, razor-sharp cutting edge.
With an approximate 400–650 grit finish, this natural stone is ideal after coarser sharpening stones have established the edge. The generous 6 x 2 inch working surface provides ample room for sharpening kitchen knives, hunting knives, outdoor blades and woodworking tools with consistent, controlled strokes. Mounted in a durable base with a non-slip rubber footing, it offers improved stability during use while helping to protect your work surface.
For best performance, use the stone with a suitable honing oil and clean it after each sharpening session to maintain its cutting efficiency and extend its service life.
Features
Brand: LANSKY
Product Code: LSLBS6H
Manufacturer Model: LBS6H
Barcode / GTIN: 080999069004
Stone Type: Hard Arkansas Novaculite
Grit: 400–650
Stone Dimensions: 152 mm × 51 mm (6" × 2")
Recommended Lubricant: Honing oil
The LANSKY Hard Arkansas Stone is an excellent choice for anyone looking to achieve a finely polished edge. Its genuine Arkansas Novaculite construction and stable bench-mounted design make it well suited to maintaining knives and tools with precision, delivering consistent finishing results for both professional users and home sharpening enthusiasts.
Instructions
USING YOUR ARKANSAS BENCH STONE
Step 1 - Select the proper stone for your edge.
Soft- To maintain an already sharp edge
Hard- To hone/polish a finished edge
Step 2 - Set the stone on a stable, flat surface.
Step 3 - Lubricate the stone’s surface using Nathan’s Natural® Honing Oil.
Step 4 - Observe the bevel angle on the blade you intend to sharpen. Then, bring the edge to the stone matching your sharpening angle to the bevel angle.
Step 5 - Using light pressure, push the edge of the blade across the stone in one motion, much like trying to slice a thin layer off the top of the stone. Maintaining a consistent angle is essential for the best results.
Step 6 - Repeat process 3-4 times on one side of the blade, then switch to the other side and repeat.
Step 7 - Repeat this process until edge is sharp.
Step 8 - Make sure to clean your stones after each use. Store in a cool dry place.
Suggestions
1. Use a series of stones for the best results. Course -> Medium (Soft) -> Fine (Hard) -> Extra Fine
2. Start with 3-4 strokes per side. Repeat this process 3-4 times.
3. Then 2 strokes per side. Repeat this process 2-3 times.
4. Then 1 stroke per side. Repeat this process 1-2 times.
5. Then move on to a finer stone.
With an approximate 400–650 grit finish, this natural stone is ideal after coarser sharpening stones have established the edge. The generous 6 x 2 inch working surface provides ample room for sharpening kitchen knives, hunting knives, outdoor blades and woodworking tools with consistent, controlled strokes. Mounted in a durable base with a non-slip rubber footing, it offers improved stability during use while helping to protect your work surface.
For best performance, use the stone with a suitable honing oil and clean it after each sharpening session to maintain its cutting efficiency and extend its service life.
Features
- Genuine Hard Arkansas Novaculite sharpening stone.
- Approximate 400–650 grit for fine edge refinement and polishing.
- Designed for the final honing stage of sharpening.
- Large 6 x 2 inch bench stone provides a generous sharpening surface.
- Mounted in a durable composite base.
- Non-slip rubber base helps keep the stone stable during use.
- Suitable for knives, woodworking tools and other edged implements.
- Designed for use with honing oil.
Brand: LANSKY
Product Code: LSLBS6H
Manufacturer Model: LBS6H
Barcode / GTIN: 080999069004
Stone Type: Hard Arkansas Novaculite
Grit: 400–650
Stone Dimensions: 152 mm × 51 mm (6" × 2")
Recommended Lubricant: Honing oil
The LANSKY Hard Arkansas Stone is an excellent choice for anyone looking to achieve a finely polished edge. Its genuine Arkansas Novaculite construction and stable bench-mounted design make it well suited to maintaining knives and tools with precision, delivering consistent finishing results for both professional users and home sharpening enthusiasts.
Instructions
USING YOUR ARKANSAS BENCH STONE
Step 1 - Select the proper stone for your edge.
Soft- To maintain an already sharp edge
Hard- To hone/polish a finished edge
Step 2 - Set the stone on a stable, flat surface.
Step 3 - Lubricate the stone’s surface using Nathan’s Natural® Honing Oil.
Step 4 - Observe the bevel angle on the blade you intend to sharpen. Then, bring the edge to the stone matching your sharpening angle to the bevel angle.
Step 5 - Using light pressure, push the edge of the blade across the stone in one motion, much like trying to slice a thin layer off the top of the stone. Maintaining a consistent angle is essential for the best results.
Step 6 - Repeat process 3-4 times on one side of the blade, then switch to the other side and repeat.
Step 7 - Repeat this process until edge is sharp.
Step 8 - Make sure to clean your stones after each use. Store in a cool dry place.
Suggestions
1. Use a series of stones for the best results. Course -> Medium (Soft) -> Fine (Hard) -> Extra Fine
2. Start with 3-4 strokes per side. Repeat this process 3-4 times.
3. Then 2 strokes per side. Repeat this process 2-3 times.
4. Then 1 stroke per side. Repeat this process 1-2 times.
5. Then move on to a finer stone.
Orders received before 8am (Melbourne time) will be shipped same business day. All orders received after this time will be shipped next business day.
Standard shipping times: 3 - 5 business days metropolitan - (additional time for regional locations)
Express Shipping Time - (1 business day for Metropolitan, 1-3 business days for all other locations)
These are shipping times defined by Australia Post, once your order has been dispatched, we no longer have any control over the shipment and all inquiries should be made through Australia Post before contacting us.
Most orders are dispatched from our Melbourne Warehouse location, however on rare occasions your order may be dispatched directly from the manufacturer or one of our business partners.
It is always best to have your parcel delivered to an address where you are sure that someone will be available to receive it during business hours. A business address is often good for this reason, but if you are having your parcel sent to work, remember to include your company’s name (and the department or level where you work).
INTERNATIONAL SHIPPING
We ship world wide via Australia Post or DHL. Please note that you may be required to pay any taxes and duties imposed by your country of destination to clear this item through your "Customs" process.